dreamgal
Hi. I have the canon camera SD1200 and recently it has an issue. It dosent work properly, like the button turns on but the camera dosent work, it just says "Lens error, restart camera" and the lens is sticking out. What should I do? Is there a way to fix it without sending it to the consumer? And how do I restart the camera?
Thank you.
Answer
Every single day on YA, several people ask for advice about their broken camera.
Little P&S cameras seem to be fragile, they don't like to be dropped, sat on, or squashed in a bag, least of all while they are turned on and the lens is extended.
If you (or your sibling/cousin/dog) have bent your lens, your camera is broken.
If it suddenly won't take photos, or does other extremely weird things, it is probably broken.
So now that your camera no longer works, there are a few things you can try (regardless of what the actual symptoms are):
1) READ YOUR MANUAL !!!!!! There is a reason why we get those, they are full of good ideas. They also have a trouble shooting section which may help you figure out what is going on.
2) Pull out the battery for 30 seconds - sometimes that resets the camera. Read the user guide if there is a way to "factory reset" the camera.
3) Check the manufacturer's website. You might find good advice, or user forums, or links to their support section, or a person to "live chat" with or all of the above.
4) Take the camera to a local repair shop. If it is just a little P&S, you'll most likely find it will be cheaper to replace it, than it is to repair it. But it is worth a try, right?
5) If you have exhausted all other options and you have decided the camera is now a paperweight, start trying to fix it yourself. I have heard people say they managed to bend the lens back into position and the camera worked again.
Good luck, and make sure to be nice and gentle with your next camera (and stay away from Kodaks...... they seem to break just by looking at them).
Every single day on YA, several people ask for advice about their broken camera.
Little P&S cameras seem to be fragile, they don't like to be dropped, sat on, or squashed in a bag, least of all while they are turned on and the lens is extended.
If you (or your sibling/cousin/dog) have bent your lens, your camera is broken.
If it suddenly won't take photos, or does other extremely weird things, it is probably broken.
So now that your camera no longer works, there are a few things you can try (regardless of what the actual symptoms are):
1) READ YOUR MANUAL !!!!!! There is a reason why we get those, they are full of good ideas. They also have a trouble shooting section which may help you figure out what is going on.
2) Pull out the battery for 30 seconds - sometimes that resets the camera. Read the user guide if there is a way to "factory reset" the camera.
3) Check the manufacturer's website. You might find good advice, or user forums, or links to their support section, or a person to "live chat" with or all of the above.
4) Take the camera to a local repair shop. If it is just a little P&S, you'll most likely find it will be cheaper to replace it, than it is to repair it. But it is worth a try, right?
5) If you have exhausted all other options and you have decided the camera is now a paperweight, start trying to fix it yourself. I have heard people say they managed to bend the lens back into position and the camera worked again.
Good luck, and make sure to be nice and gentle with your next camera (and stay away from Kodaks...... they seem to break just by looking at them).
Canon 50D - 28-135 USM Lens Error 1?
Bob H
Hi, i purchased my camera just 5 days ago and i already had the error 1. Its popped up around 7 times already. I cant see how the contacts could have been damaged. Does anyone know what to do to stop the error 1? It says that the contact with the lens is "faulty." Thank you!
Answer
Call Canon 800.OK-CANON. They can help you.
While rare, you could have either a bad lens or camera body (or both). Canon will walk you through the troubleshooting steps to figure out what is wrong. Worst case, you will have to send the camera and lens back to Canon and cool your jets until they can repair or replace the camera/lens.
Call Canon 800.OK-CANON. They can help you.
While rare, you could have either a bad lens or camera body (or both). Canon will walk you through the troubleshooting steps to figure out what is wrong. Worst case, you will have to send the camera and lens back to Canon and cool your jets until they can repair or replace the camera/lens.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar